Recent Activity

Mark's Dad liked BuildingMad's post in the thread Survey report: roof trusses.

If reference is to these straps, then you can see them if present. Take a photo & send it to the builder if you cannot see them....

Mark's Dad liked Mr Rusty's post in the thread Survey report: roof trusses.

Confirm he stands by "no strapping" and point out he may be liable for your damages or consequential losses if his statement proves untrue.

Mark DM liked WildCat's post in the thread The joke thread.

[ATTACH]

Mark DM liked WildCat's post in the thread The joke thread.

Man: I haven’t spoken to my wife in 18 months. Friend: Why not? Man: I don’t like to interrupt her.

WildCat posted a new thread.

Is it the Baltic Sea or the Bright Sea?

[ATTACH]

Forum: Just Talk

I-Man replied to the thread Repair MDF Cabinet Door.

FYI that's not MDF - it's particle board

Adg7 replied to the thread Splitting one cold water feed to serve basin and toilet.

One below is old/disused. so speedfit tee then which end connections would be suitable for the female 1/2 ends of the flexi hoses

Mr Rusty replied to the thread Survey report: roof trusses.

Confirm he stands by "no strapping" and point out he may be liable for your damages or consequential losses if his statement proves untrue.

arrow liked stevie22's post in the thread Ending Solar Panel Lease.

Wouldn't this all have been made clear during the searches though so you knew exactly where you stood. The OP clearly didn't

arrow replied to the thread Ending Solar Panel Lease.

Where did I say they didn't, I said I personally would not buy one.

BuildingMad replied to the thread Leaking wall mounted basin mixer at cold water feed.

Brass compression fittings need olives to compress.

Ceebee replied to the thread Electric Hob Help.

Is the hob to be fitted over the oven by any chance or even nearby? It would be worthwhile looking at the possibility of hardwiring a...

LearnMore replied to the thread Leaking wall mounted basin mixer at cold water feed.

How did you apply the tape? Where does it leak from?

LearnMore replied to the thread Splitting one cold water feed to serve basin and toilet.

Is that an additional pipe below? Usual practice would be to just tee off.

Josie Rothnie posted a new thread.

Leaking wall mounted basin mixer at cold water feed

We’ve put in a new wall mounted mixer unit for the bathroom basin, using brass compression adapter male couplers and ptfe tape on the...

Forum: Plumbers' Talk