9 lights sounds ok for that area , set out to clear top of cupboards but illuminate worktops, over sink if you have one . I wouldn't install...
I can understand the regs thank you very much, last time I looked a fire rated downlight was only required if it was to be fitted in a fire...
That's just scaremongering RS, I use common sense . Inidentally what do all those numbers mean, my regs are in the post
Take the cover off the outside light and see what's there. You should be able to identify the Neutral . Use your multimeter to identify what the...
Is there a switch position that brings on the light permanently
Better to ask under which circumstances would you ..need.. to use firerated downlights in a domestic setting ,,, I can't think of any , scraping...
That's the way I did it and it's working fine. I just used switched sockets, I think unswitched are more expensive. I wired a few worktop twin...
the 20A switch or Sw Fcu is quite likely
I said it was ok, but it wasn't the best I also said there may well be damage to the flex as it is outdoors. sparky Si FI posted to the effect...
You really should have read my post before replying in that manner.
pauler, an extension lead out to your shed isn't the best way to do it as no doubt you understand. There is no specific reason why...
The way you suggest is the best as far as I know, however I think I would use a waterproof plastic box instead of metal. SY cable is better than...
As you have it exposed the least you can do is join it up using a good quality 30A junction box ( in theory as it will become inacessible then a...
Is that 6 banks of 2lights JP ? bet you get fed up operating all 6 switches when you want the lights on you would get all them at a squeeze...
Separate names with a comma.