Yes, fine on dhw
Pump is in fixed mode And confirm, the boiler runs fine then shuts down on its stat - no kettling. Flow temp 65 - 70 degrees from memory.
Peter, Pump and valves definitely correct way round. But you have a point with speedfit. Maybe have a direct link between a poor radiator to...
Thanks for the replies. I have fitted a new Honeywell 2 port valve body only very early on as had one in the van. The 2 port was opened during...
Hi all, any ideas on this problem at a clients house - Original call saying oil boiler short cycling little heat in some rads, some stone cold....
Hi all, Have acquired a H20/25 water softener - I believe manufactured by Harvey. The label states seial 37230, model 1000, regen 17 and resin...
Morning all, Have a potential job at a small dog grooming premise. They currently run the dog shower and washing machine off mains. They have...
I have been in touch with Fernox - and the F4 sealer is compatible with the X100 and pretty well all inhibitors - it has to be as it will be added...
Just been thinking about your system - you would of course need a valve on the heating circuit. This isolates the power from the pump when running...
Hi - yes, you could change the programmer to a standard 2 channel programmer with separate hot water and heating demand. Wire the programmer hot...
Hello Mr Tommycabs, I will ring Fernox technical tomorrow to see what they say. As you say, the bottle does state "do not mix with other...
The pump is brand new - and appears fine, as when I opened the lockshields, significant water flow could be heard. I do not remember the...
Separate names with a comma.