You could always hire the router and jig from HSS. I did this for my first worktop and it worked a treat. Plenty of "how to's" on the web, trend...
Cheers lads, soldering on was spot on, lifted the manhole cover and it was full of the nasty stuff. Gave it a good rodding and whoosh! All...
Ta so far. Not syphonic No blue blocks or rim hung cleaners used. Clear from pan to bend to vertical soil pipe.
Recently my toilet seems to be draining slower than it used to. The initial flush seems ok, then the last say inch of water takes about 5 seconds...
Cosworth They (D&M) have to replace it by law under the sale of goods act (not fit for purpose). Don't let them fob you off with a "return to...
as above. You will most likely have 2 immersion heaters in your hot water cylinder, 1 for overnight cheap rate (the lower one) and one for...
Some advice please. My boiler (a recent Worcester Bosch system boiler) is more or less next to the hot water cylinder (about 3 feet of pipe)....
To calculate the angle of the roof (using a calculator!): 1) Measure the width of the roof (at the gable, say at gutter height) and divide by...
I clamp one piece of 8x4 on top of the other and use that as a guide.
oliver. What about if turning on other taps causes water hammer. The vibration could cause the spout to release its held water? To the...
What about a bench morticer
You probably got the lead caught!
What you need to do is this: Piece A needs to overhang the top step with a 45 on the end Piece A+1 needs to go vertically up the top riser...
Separate names with a comma.