Thanks for the replies. When I plumbed it, money/time was tight as was the gap where I had to thread the feed and it was easier to use 15 than...
I can leave the hot tap running for 10 - 15 mins with no sign of even slightly slowing down. A strong flow and what I'd expect from the 15mm pipe....
When I say its working fine now, it is if I have a piece of duct tape stuck over the end of the vent pipe. Trying to find a reason why Tony
Hi Tomplum The whole system is plumbed in 15mm. Even the bath tap and cold feed to cylinder (can't blame anyone, I did it myself 20 odd years...
Thanks for the replies I've removed the tape for now just in case. While the BG man was scratching his head, I suggested fitting a one-way...
I’ve got a bit of a poser I hope some of you experts can solve for me I’ve had a problem with my hot water for a few weeks. Turn on...
Thanks to all who replied. I'm going to go with the cut & weld idea rather than the bending.
Thanks for the replies. Its to go on a boat trailer to hold the boat steady when its being recovered. It bolts on to the trailer with an 'arm'...
I want to bend about 1 metre of a 4 metre Scaffold Tube to an angle of about 80 degrees and then weld a strengthening piece across the angle. I...
Thanks for the replies lads - much appreciated. I realise I won't get a guarantee - I think a lot of those sort of things aren't worth a lot...
Hi All. Sorry if this has been asked before. I need to treat the timbers in my attic. Any recommendations on product (Screwfix product any...
Separate names with a comma.