What r stat ya got, have you checked voltage compatibility high or low? 5 core or 2x 3 core
There is a lot involved in that, you need 2 separate flow & returns for each zone & a pair for uf
Wet has a manifold wet uf has a manifold, pump, blend valve, they rather noticeable. See if boiler fires up etc
Yes just take easy, always pressurise system before bleeding so not to get caught out, one should never pressure test with air as it's compressed,...
Fit a timer
If fitting break you need iso valve, strainer, scale reducer, then pump on inlet, check valve,3bar PRV, exp vessel & exp relief valve, you also...
Anyone had any experience with "service magic"???
It could be flame distance in relation to phial, or blocked pilot tube, or lose connection at armature end on gas valve, or draught, or viewing...
Just pull the pipe slice whilst turning in the opposite direction to what it is threading
Hello, what are trying to do?
Yes that is fine, just T it into flow or return, be sure to allow access to valve for re-charging
It's a large vessel to circulate the water between the primary flow & return, the draw offs to the separate htg zone's are drawn form here & the...
IT is scaled up
SCaled up
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
