Hi, need to remount 2-inch width aerial mast after the mast snapped right at the bottom. (It broke at the bottom 6-inches) The clamps I bought from Screwfix were too short to go all the way through to the chimney bracket. Also the V-brackets from Screwfix are for mounting the aerial onto the mast rather than the mast on the chimney bracket. These are too short http://www.screwfix.com/p/labgear-tv-aerial-fixing-clamps/31499 The chimney bracket looks like this http://www.screwfix.com/p/labgear-tv-aerial-wall-fixing-kit/96275 Which V-clamp bolts do I need for 2-inch mast that are long enough. Also need the clamp part with teeth to bite into the mast itself otherwise it will slip down.
You need V bolts c/w sledges for a 50mm not 25mm/32mm pole. Either 2" or 2.5" V bolts c/w sledges. Linky: http://www.aerialsandtv.com/onlinepolesandbrackets.html#2x2Clamp