Recent Activity

The Denes posted a new thread.

Fluidmaster lever to button

I have purchased and fitted a Fluidmaster Lever Dual-Flush kit but would like to change to a button, there does not appear to be one...

Forum: Plumbers' Talk

Wellwisher replied to the thread New CU in outbuilding.

No electricity meter then?

Screwfix replied to the thread New kitchen tap.

Probably not too difficult. A pic or two might help.

HarryL1234 replied to the thread Grout Gun.

Grout guns seem to be like Marmite. I have no doubt all the people who say they couldn't get it to work, but it's never failed to work...

Clg2024 posted a new thread.

New kitchen tap

Looking at replacing the kitchen tap but the pipes are copper. How difficult is to do it and do the copper pipes need to be cut?

Forum: Plumbers' Talk

Wellwisher replied to the thread New Pull Cord filling for Bathroom.

Basically you have bought the wrong switch. Take it back and get the correct one.

Nicolle replied to the thread Shower running hot and cold.

It’s a Worcester green star 28iJunior combo boiler

Wellwisher replied to the thread Part P vs BS7671.

Why do you lie? If I didn’t understand I wouldn’t post.

ramseyman replied to the thread Grout Gun.

I bought one, tried it and couldn't get it to flow so gave up after having it only a week. Put it on Ebay as an auction secondhand and...

stuart44 replied to the thread Grout Gun.

The problem with these guns is that you're mixing up a gauge specifically to suit the gun, rather than a mix that is the correct one for...

Jo bowe posted a new thread.

Which Interior door

Hi all, we’re replacing the interior doors but not sure which is best, we want a half glazed solid type preferably pre primed if...

Forum: Carpenters' Talk

Jo bowe replied to the thread Painting newly plastered walls.

We’re actually using Zinder all clean scrubbable interior matt

Berni29 replied to the thread Any metalworkers? What paint do you use on bare metal like mild steel?.

Hi 2k epoxy primer and no need for a top coat if don’t want. It’s waterproof and seals the metal. Berni

Refuse to Bend replied to the thread Consumer Unit change.

Contact Building Control before you do it and ask if your qualifications are acceptable. Generic certs are easy to get hold of.

MGW replied to the thread Earth impedance problem..

That is also what I think.