Can anybody tell me where i can buy 18mm contiboard for a custom kitchen. Oak vaneer would be even better.
i think a firm called international decorative surfaces, i know they specialise in worktops but i think they do allsorts of decor board too
Conti board is a trade hame a bit like Hoover, Conti only comes in 15mm thick and upto 30" wide so you need to be looking for Melamine Faced Chipboard - MFC. Don't know where you are but I'm near Croydon, Surrey and use Richard Russel, they do both MFC & Veneered boards & rolls of edging to suit. http://www.richardrussell.co.uk/ Hope you have a nive sharp laminate blade for that MFC Jason
If you're near Sheffield or Oldham then look for Hills Panel Products - large distributor of MFC and MDF sheets.
Contiboard is now available in 18mm from six B&Q stores they are York, Glasshoughton, Warrington, Farnborough, and Castlepoint. And Pool. Colours are Beech, Maple, Oak, Silver effects panel. Sizes 250mm 325mm 450mm 600mm and 1000mm and 2000mm long. Other panels are Membrane pressed to match and foil colour matched back panels 2000x600x3mm, as well as decorative Mouldings and natural MDF shaped Panels. I hope this helps Conti man
If you go to Conti Boards site you will find that they DO NOT manufacture 15mm board only 18. The boards are lined with hard wearing plastic strip. Unfortunately they have now changed from imperial to metric sizes. Visit them at www.conti.co.uk
Are you wanting oak veneer or oak melemine? Oak veneer go to james Latham Oak melemine james latham for jumbo sheets or Hills panels for cut and edged boards. Conti board isn't the best, either eggar of kronospan
i can supply you with what you need if you want i will cut it down for you aswell and also deliver please get back to me for a quote lee
If he hasn't got his chipboard yet, I'd guess he's never going to find it. This post started nearly 3 years ago!
I was at B&Q last night looking for 15mm contiboard. They have now gone metric, and all of their contiboard (except white) is now 18mm.
Morning all, I appreciate this is quite an old thread, but I am looking for an MFC supplier in the West Mids or Staffordshire area. I need a load of 500mm x 18mm boards to do some wardrobe interiors - anyone know of a supplier in this area? Cheers, Andy
Hills panels are south sheffield and anything over £200 they will deliver for free, best range of cut and edged I know of
We are manufacturer of fiber cement board,mgo board,fiber cement roofing sheet etc. We always keep good relationship with prefabed house builder,contractor,wholesaler, distributor etc.We will form our own brand"kboard" in overseas market,at the sames time.