Gardtec 350 home alarm

Discussion in 'Electricians' Talk' started by Ray Ashby, Jul 2, 2014.

  1. Ray Ashby

    Ray Ashby New Member

    Can anyone help please. I have a Gardtec 350 home alarm installed (approx 15 years). I need to re-route the cable from the outside bell to the control unit. Currently, it runs round the wall of an upstairs room but I want to put it under the floorboards. When I turn the mains power supply off or remove the in-line fuse that feeds the control unit, the outside bell goes off. How can I unpower the system so that the alarm stays quiet for about ½hr to route the cable under the boards.
     
  2. flateric

    flateric Well-Known Member

    You will need to disconnect the battery inside the bell box or let it time out, the timer can be set for about 5 - 20 mins the latter being the norm
     
  3. dale76uk

    dale76uk Member

    unless its a really old SAB with no timer :-(
     
  4. flateric

    flateric Well-Known Member

    This is true ......I did not have my antique head on when I replied :rolleyes:
     
  5. Ray Ashby

    Ray Ashby New Member

    thank you for the info, much appreciated
     
  6. Ray Ashby

    Ray Ashby New Member

    many thanks
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice