Price of installing a flat pack kitchen

13 Units £650
3 mitres £150
Rip out £75
B/bar £50

But I suspect there is more to the job than that.

 

Figure out what you would like to earn per day, Make sure the amount is in line with competitors.

work out how many days it will take you, work out what you need to pay out in labour, add all these amounts together....

www.konektmaintenance.co.uk

 

Agree with Konect and Metro...seen kitchens turned into firewood with shody fitting...If you project manage the work, (therefore responsible for the finished product) consider that, you will get the phone calls. Being flatpack, most outlets offer a fitting service, ask your customer to get a quote from them,, you will fall of your router..but personally if I was that busy I wouldn't take on a fit like that on a nights and weekend..no control over any subbbies..good luck.

 

Just wondered that when you say you've got the job, have you not been asked to quote first ?

Just seems funny to have a job without being sure what to charge

Could lead to problems with the client when price is discussed, especially if part way through the job or at job completion

 

Good point DIY Dave.

 

Yes a very good point.

 

Cheers Astra and P B

I'm not trying to be clever here but seems like working back to front

Don't most clients want to know the costs before the job starts or a contract is awarded - either a quote or at least an estimate

Maybe the work is for a friend or family , in these cases it's still equally important that a figure is discussed

 

Its not how I would work Dave I must say,no quote or estimate and things fall out of bed very quickly.

 

Really very informative point you guys have put up in getting the opinion of others.

 

We aim to please on here Luke.

 

ok I did that
Id like to earn £500 per day
it will take me 3 days
i will pay out 0 labour
500 +3+0= 503

also why do i have to make sure its in line with my competitors do we all need to conform?

 

Well you dont need to make sure its in line with competitors, However, if you charge £3000 per kitchen but other competant fitters charge £1200, Whos going to win the work? Also, 500 per day x 3 days is £1500, Not £503.

Go to www.konektmaintenance.co.uk and read our kitchen blog

 

Get someone in who knows what they are doing to price it up . Add your 10 percent. Job done quicker for the client too.

 

Totally agree with this

 

My Fitting Prices

• • Rip Out Kitchen £50
  • Fitting Per Unit £40
  • Boxed to Ceiling Per Meter £8
  • Infil Pannels £10
  • WorkTop Joint £40
  • WorkTop Edging Each £5
  • Extraction Hole £25
  • Ducting Kit £30
  • Splashback Each £100
  • Laminate Floor Per Meter inc Skirting £12
  • Plumb Washer £40
  • Plumb Dishwasher £40
  • Cut out and Plumb Sink with in a meter £50
  • Cut out Hob £50
  • Gas Hob Connection
  • Gas Oven & Hob Connection £110
  • Supply & Fit Stop Tap with a Meter £45
  • Supply & Fit Out Side Tap

Hope this helps used this for years and its all ways worked out right for me

 

Hells bells Hudson, where did you copy that price list from?

 

Looking a little low there Hudson
No electrical work?
The plumbing parts for fitting a WM could be getting on for £20 alone.

 

Its kept on my computer V
And Electrician comes and prices that work
Been using this price list for last 2 years and it works out good for me oh and I have another price list for pluming bits too

Plumbing Price List

JG Speedfit PEM0410WP Straight Couplers 10mm £2.20 each
JG Speedfit PEM0415W Straight Couplers 15mm £1.50 each
JG Speedfit Straight Coupler 22mm £2.20 each
JG Speedfit PEM0428WP Straight Coupler 28mm £5.90 each
JG Speedfit 15RKP Slip Coupler Repair Kit 15mm £12.00 each
JG Speedfit 22RKP Slip Coupler Repair Kit 22mm £13.00 each

JG Speedfit PEM0310WP Elbow 10mm £2.10 each
JG Speedfit PEM0315W Elbow 15mm £1.50 each
JG Speedfit Elbow 22mm £2.50 each
JG Speedfit PEM0328WP Elbow 28mm £6.00 each
JG Speedfit PEM2210WP Stem Elbow 10mm £3.00 each
JG Speedfit PEM221515WP Stem Elbow 15mm £3.00 each
JG Speedfit 15mm x 10mm Stem Elbow £3.80 each
JG Speedfit 135° Stem Elbow 15 x 15mm £3.50 each

JG Speedfit PSE4610WP Stop Ends 10mm £1.90 each
JG Speedfit PSE4615W Stop End 15mm £ 1.50 each
JG Speedfit Stop End 22mm £2.00 each

JG Speedfit Plastic Pipe Insert 10mm £0.25 each
JG Speedfit STS15 Plastic Pipe Insert 15mm £0.22 each
JG Speedfit Plastic Pipe Insert 22mm £0.40 each
JG Speedfit STS28 Plastic Pipe Inserts 28mm £0.60 each

JG Speedfit Reducing Coupler 22mm x 15mm £4.00 each
JG Speedfit Reducing Coupler 15mm x 10mm £3.00 each

JG Speedfit 15STVP Stop Cock 15mm £7.20 each
JG Speedfit 22STVP Stop Cock 22mm £10.20 each
JG Speedfit 15ESTOP Emergency Shut Off Tap 15mm £4.00 each
JG Speedfit 15SVP Isolating Valve 15mm £4.50 each
JG Speedfit 22SVP Isolating Valve 22mm £9.50

JG Speedfit PEM0210W Equal Tee 10mm £2.50 each
JG Speedfit PEM0215W Equal Tee 15mm £1.90 each
JG Speedfit PEM0225W Equal Tee 22mm £3.30 each

JG Speedfit Monobloc Tap Connector 15mm x M10 x2 £12.00 each
JG Speedfit Monobloc Tap Connector 15mm x M12 x2 £12.00 each

JG Speedfit BPEX Barrier Pipe 10mm £1.00 pmtr
JG Speedfit BPEX Barrier Pipe 15mm £0.80 pmtr
JG Speedfit BPEX Barrier Pipe 22mm £2.30 pmtr

Talon Red,Blue,Clear Hinge Clip 15mm £0.10 each
Talon Red,Blue,Clear Hinge Clip 22mm £0.12 each

 

oh and one for waste too lol