Albion Mainsflow Problem.

Discussion in 'Plumbers' Talk' started by Jimbob1980, Feb 19, 2014.

  1. Jimbob1980

    Jimbob1980 New Member

    I have an Albion Mainsflow Indirect tank fitted at home. When I fill a bath, I only get it a quarter full before the water starts to lose temperature. Same with a shower, I get about 10 mins before the same happens.
    If anyone has any idea what the problem might be I would really appreciate their thoughts.

    Thanks in Advance.
     
  2. meady

    meady Member

    Has it always been like this or slowly got worse and worse
     
  3. Jimbob1980

    Jimbob1980 New Member

    I've been in the house 3 years and it has always done it. When the water starts to lose temperature I have been turning off the taps, leaving it for 15 mins or so then I get more heat again for a very short period
     
  4. meady

    meady Member

    Is the cylinder heated via the boiler or just immersion heaters???
     
  5. Jimbob1980

    Jimbob1980 New Member

    It's heated via the boiler. I don't use the immersion.
     
  6. Jimbob1980

    Jimbob1980 New Member

    Any ideas guys??
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice