Do I need hinge tite screws for butt hinges

Discussion in 'Carpenters' Talk' started by lemonade, Jan 6, 2017.

  1. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    Jealous coz you frightened all your kids away. remember, I read between the lines!

    Mr. HandyAndy - Really
     
  2. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    Bordering on slander, that is.
     
  3. chippie244

    chippie244 Super Member

    Well there is one upstairs and the other one is at Uni studying Bio-medical science.
     
  4. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    One moved out and one hides upstairs! Frightening.
     
  5. chippie244

    chippie244 Super Member

    Do you actually read and understand what is being posted?
    You need the right type of screw in the correct gauge.
    This is really simple and very basic stuff but you fail to understand it again and again.
    Your advice was to use the wrong type of screw.
     
  6. CGN

    CGN Screwfix Select

    I use nails...just bend the head over. Nothing like a satisfying slam to shut a door! :D
     
    BuilderCol and Doall like this.
  7. chippie244

    chippie244 Super Member

    Is that the sound of a barrel being scraped, going to University to be educated is quite commom and stops you from ending up as a second rate handyman and a teenager being in his bedroom on a computer is also pretty common.
     
    Joe95 likes this.
  8. chippie244

    chippie244 Super Member

    As long as you use annular ring nails.:)
     
    CGN likes this.
  9. Joe95

    Joe95 Screwfix Select

    Ring shank nails would work.

    Oh, chips got there first:rolleyes:
     
    CGN likes this.
  10. Phil the Paver

    Phil the Paver Screwfix Select


    It certainly is in my house, can't get him off it.
     

  11. Do they have different head sizes ? :rolleyes:
     
    Joe95 and CGN like this.
  12. Phil the Paver

    Phil the Paver Screwfix Select


    Only if they're counter sunk. :D:D:D:D:D
     
    CGN likes this.
  13. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    The wrong type of screw but which fitted flush as desired.

    Mr. HandyAndy - Really
     
  14. CGN

    CGN Screwfix Select

    Oval are best :)
     
  15. chippie244

    chippie244 Super Member

    Shut up you moron, why would you buy the wrong type of screw on the off chance it may work when you could buy the correct screw which will fit, sorry I know the answer to this, it's when you're Handshandy and as thick as mince.
     
  16. chippie244

    chippie244 Super Member

    Lost heads.
     
    CGN likes this.
  17. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    Just cut the head off, saves all the trouble.
     
  18. Mr. Handyandy

    Mr. Handyandy Screwfix Select


    Now you are calling the OP a moron.

    You really are something else(and not in a good way)
     
  19. wiggy

    wiggy Screwfix Select

    Torx head
     
  20. CGN

    CGN Screwfix Select

    Screwed in with the Paslode! See...the old skills are never lost...passed down from generation to generation. :)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice