Need to buy an integrated fridge freezer not sure what size was there before, based on the outside top fridge door measurement of 120cm & the bottom freezer being 71.5cm is this a 60/40 or 70/30?
Sorry what do you mean, raised up how exactly & do you mean the bottom of the cabinet as being on the floor?
The answer to your question is 70/30 if your current F/F in sitting on the cabinet base. If it has been raised up from the cabinet base onto another shelf, it could be a 60/40 F/F.
I don't have a current F/F & don't know what size was there before all I have are the doors sizes to try to work it out. There is no raise inside the actual unit if that's what you mean just a flat unit base.
Some F/F's have feet that can be up to 50mm, so you would need to subtract this from the height of the lower door.
No integrated tall F/F has feet of any description. Free standing and integrated built under fridges and freezers certainly do, but not integrated tall F/F.
I just fitted a tall integrated f/fz and it came with 50mm screw in legs. They were needed as the freezer was so small it would not line up with a standard 720mm high door. The appliance was pants!
The distance between the unit inside 2 top door hinges is 98mm & the distance between the 2 bottom door hinges is 50.5mm if that helps at all? I assume these distances were for the integrated fridge freezer appliance doors that was there before.
Normaly fit That has got to be some cheap bit of **** then ? Never come accross a built in tall F/F that scew in legs .
The old MFI own brand rubbish had a very similar system. The legs would break off if you tried to slide the appliance about before fitting it inside the unit
The Beko BCFD150 absolutley does - they were a pain to fit and kept falling off as I was sliding the F/F into the housing.