I need to terminate 1 twin and earth lighting cable in my bathroom. This i because I'm planning to remove 2 old 9W IP44 dome lights and reuse 1 of the connections with a IP65 18W new dome light, capping off the old lighting connection. This means capping off one 1.5mm^2 earth, neutral and live cable Can I use a spring wire connector cable clamp terminal block (CH2) to do this? I bought this product: https://www.amazon.co.uk/gp/product/B01NGU80LM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 It was described as a cable clamp.
Well.. ypou could use that the terminate the ENDS. But the termination must go inside an enclosure. And, that enclosure should be screwed to something solid (and the cable cleated). Or you could use something like this https://www.screwfix.com/p/debox-in-line-connector-box/8692h
What about the Hylec DEKSB-002 DEBOX In-Line Connector Box Junction Box 4 Pole Terminal Block? At ebay: https://www.ebay.co.uk/itm/Hylec-DE...128449?hash=item262564ecc1:g:J6cAAOSwbXddZUzK.
That is the same as the one in my link. Screwfix 99p. Fleabay £2.60 for the same product! Up to you mate.