Shower tray with upstand

Discussion in 'Plumbers' Talk' started by Ollieu1900, Jul 24, 2021.

  1. Ollieu1900

    Ollieu1900 New Member

    Hello,

    I have a shower tray which has 2 edges behind the bottom row of tiles.

    Any idea how to check if the tray has 4 upstands or 2 as the outer edges with the doors on have upstands. (It's a 90x90 square tray)

    Reason being a small part of the sealant has slightly lost adhesion but looks perfect on 90% of it. Really don't fancy redoing all of it.
     
  2. I-Man

    I-Man Screwfix Select

    Can you send a picture
     
  3. Ollieu1900

    Ollieu1900 New Member

    I will try and take a better photo later, I know the make is "ideal standard" if that means anything?
     

    Attached Files:

  4. I-Man

    I-Man Screwfix Select

    The front part is not an upstand, it's just a length of upvc which has been fixed on, probably with silicone.
     
  5. Abrickie

    Abrickie Screwfix Select

    Or it could be an Ideal Standard Idealite Low Profile Square Upstand Shower Tray, just saying ;)
     
  6. I-Man

    I-Man Screwfix Select

    Quite possibly... But I'm willing to bet its not
     
  7. Ollieu1900

    Ollieu1900 New Member

    I can guarantee it is an upstand on atleast the 2 sides I can see. No joint in sight or silicone. In fairness it's a poor photo so I'll try and take another
     
  8. Ollieu1900

    Ollieu1900 New Member

    Apologies...it needs a good clean but its not been used in a while!

    I think you may be correct. Is there any ideal standard variation that only uses 2 upstands instead of 4?
     

    Attached Files:

  9. Abrickie

    Abrickie Screwfix Select

    Not that I am aware of ;)
     
  10. Ollieu1900

    Ollieu1900 New Member

    Thanks for the reply:D
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice