Zanussi Dishwasher - Drying /Draining error

Discussion in 'Engineers' Talk' started by AndyC69, Jan 21, 2023.

  1. AndyC69

    AndyC69 New Member

    Continuous drying/draining error, cleaned everything, checked hoses, drain not blocked, flushed whole thing and cleaned, still beeps and flashes error when turned on.
    Any suggestions? Thanks.
     
  2. Teki

    Teki Screwfix Select

    Which model is it? Do you hear the pump running during the drain cycle?
     
  3. ramseyman

    ramseyman Screwfix Select

    If pump constantly running anti-flood float could be stuck on. Tip machine back or sideways up to 45 degrees to empty flood tray, water should come out and machine should then operate. Next step is to identify leak ie how water got into tray.
     
    DBCDIY likes this.
  4. AndyC69

    AndyC69 New Member

    This is the model.

    After full reset, it starts running, sink gurgles, then goes very silent - I can hear water trickling inside - sounds as if it is washing without the blades spinning….

    …this is as far as it gets before beeping And flashes white light slowly.
     

    Attached Files:

  5. Teki

    Teki Screwfix Select

  6. AndyC69

    AndyC69 New Member

  7. AndyC69

    AndyC69 New Member

    That’s the one!
     

    Attached Files:

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice