Pick the model of fridge / freezer that you want, and don't worry about how the hinges work. Some manufacturers mount the doors direct to the...
Well, I try to avoid the stuff because compared to granite, it's rubbish. It marks too easily and whats all this about having to spray some...
I do all my work in the domestic replacement market and that too is not as busy as it was. *, isn't it. [Edited by: admin]
How about searching this very site, or you could always try Google.
Fit worktops first, including making all joints, cut out for hob and sink last, in situ, with a quality jigsaw. No chance of breakage, no...
I did this to mine during a bit of brain fade years ago. I fixed mine with a 2 part "Liquid Metal" paste, as sold in a car accessory shop. Use a...
I only ever use red plugs with a 5.5 SDS masonary drill. You can use screws right up to 5mm in metric and I always use an impact driver....
Even easier, make curved template to your choice,cut most of the excess away, screw on to worktop underside up, route in the correct direction but...
No
Take a picture some time, a real close up and lets have a look at the endcap/worktop interface and I will do the same with a high gloss, stuck on...
High gloss laminate presents no problems at all. If you are worried about somehow marking the surface, use a piece of paper in between the...
My reply was to your statement that PVA does not work and nothing to do with double sided tape. I have never used it. PVA does work and it...
Depends where in the country you live. For some reason Southerners seem to like to use cement render followed by a finish coat to plaster their...
Cut a pocket in the plaster, this will give you maybe another 15mm. How do you think they get the glass into aluminium shopfronts. The section...
Absolute rubbish ! Our firm has probably stuck on more endcaps and curved breakfast bar ends than the number of kitchens you've fitted, and on...
Separate names with a comma.