Missed the point - I use the MDPE so I DO have somewhere to put the other cables as well as mains, there's nowhere to put the extras if I use SWA
Well here's a shock for you - I designed the bloody thing years ago, it was a job for Norweb done by Carters in Burnley. Basically the original...
About a month ago I ordered 70829, described as full threaded coach bolts on the website, in the catalogue and on the end of the box. They were...
I agree with the previous advice but when you saw through the frame, do it at an angle so when you are levering it out the two ends don't 'bind'.
Could be the edges of the sheets rubbing together. I'd be tempted to run a circular saw along all the joints to open them up a bit, but watch your...
Slightly glib answer - if your shims are less than 8ft, then instead of cutting down timber lengths, get yourself a sheet of plywood, mark up your...
Don't use wood, use plastic - lasts longer, lighter
I've been very impressed with a 36v drill Pro Power from B&Q for around £50 I think - it's given excellent servicce and the battery seems to last...
Having just done the ery same thing, here's how it went - Dug out approx 12" deep footings where walls were going then skimmed off soil in...
There's often some board adhesive lying around on plastering jobs - it is terrific for socket boxes, easy to mix, dries quickly and sets like iron.
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
