No planing required. The floorboards will straighten out that 2-3 mm when you fix them down.
Will this be enough..??? (dont wont TV falling off and harming the kids..!!) Sounds like it'll be just fine if you've bolted the brackets...
Block plane, file, fine scratch.
If this is just a simple up and over roof you could offset the rafters at the ridge, it looks untidy but wont be a problem structurally. If you...
Are Thomas Brothers near to the Archway still going? I bought my first Makita stuff in there in 1970, they must surely do servicing....
9 mm rebate is not enough for a rebated lock set - 12mm required (from memory) I don't know what size doors you will finish up with but I'm...
I think you've pretty much worked out how to do it. (except for mortaring the bottom of the existing brick, you need to mortar the bottom of...
Oxalic Acid crystals should bleach it out. I like to give anything due to be varnished a coat of sanding sealer as soon as it arrives on site;...
Why would you want to put a flat roof on it? What's wrong with two new hips running from the corners of your new extension and a new ridge...
or maybe just try this url: http://www.ibstock.com/pdfs/technical-support/TIS-25-Laying-frogged-bricks.pdf
Frog up
How come the panel is 30mm thick? Doesn't matter how thick the panel is, a correctly fitted hinge will still work. Trying to cover the 30mm...
You don't give us too many clues as to the construction or the age of the property, but I would first check for a cracked stone cill, (if there is...
The hinges are not designed to cover the carcass and have to be fitted in the correct position to work properly (as you've discovered). The...
all the sizes are the same its just the quality i'm questioning about??? The widths may be the same but those Fatmax things are very short...
Separate names with a comma.