anyone ever used one of these, are they any good? I have been looking at an OF2050
The compression ratio isn't really the problem, the problem is that the engine cylinders will not be strong enough anyway and there is no diesel...
Try asking here www.bmw-sport.net Its a bmw forum
The wire coming out of the wall, only 2 cores are needed for the telephone to function. They should be connected to the screw terminals inside...
One of the best... http://www.startrite.com/
I have the Bosch GCM 10S, fantastic bit of kit.
anyone that clads over old timber ought to wear a stetson and spurs.... YEEEHHHAAA!!
Did anyone get one of these, was it any good? Is the jig a decent laminate one or a crappy plastic jobbie
I just went over mine with a hand sander as it was all perfect, just a couple of end grain joints needed attention. It costs a lot less but takes...
Try using Painters Mate (from screwfix) it seems to be a good quality filler.
I used the L16 but it doesn't go very far (6 tins only did about 20sq m) Then i finished with Uzin mk 95, much much better product. See this...
what do you need welded and what type of welding?
I used to have a 3/8 Hazet ratchet which was good enough to loosen wheelnuts,It was demonstrated to me by the salesman and had a lifetime...
I have just fixed 32m2 of oak planking onto screed with L16 woodbond from Screwfix, it worked perfectly and the floor sounds absolutely solid. I...
Separate names with a comma.