It went like a dream! I put a lot of timber up there. I doubled the timber around the opening to 4 x 4.
I used 42m of 4 x 2 in the end for a...
Thanks, the way i look at it it would have more vertical hangers than before.
As for horizontal lateral pull at present its pulling on the last 4...
Thanks for the reply
I need the space fully clear above the slot which needs to be 1500mm x 300mm so not the full width of the room.
So my idea...
It would be no problem for the common rafters taking the weight as they would be only 600mm long ceiling pieces each side of the cut piece.
I want to remove the 3 central ones and leave the 2 outside ones.
I can frame the opening out with 4 x 2 as you would in a loft hatch opening and...
I would like to remove 300mm of the ceiling rafter so its a clear space
This is inside at the very end of the hip roof, ive cut a 300mm strip of plasterboard out and was greated by the ceiling rafters
This is the extension
Hi no its a fixed up and down lift
Thanks will take some in daylight tomorrow
Yes... but with the width of the extension only been 3000mm its very tight at the hip end.
Ive cut a 1500mm x 300mm piece of plaster board out...
Im fitting a electric TV lift that will lift my TV into the ceiling when not in use.
I then realized that the area where my TV will rise into is...
Thanks, Its not arrived yet but when it does Ill have a look and see how it works and see what possibly could go wrong.thanks
Separate names with a comma.