You need a 'wood to wood' dowel screw - ebay "Need a place I can go and buy it, and also an indication that it's the right type…"...
lol - don't be ashamed, they're tough industrial tools, not collectors items. The website you want is here - make sure you get the right blade...
They're a lot less than that if you buy from Hafele. Pete
I'd trust these fixings (have done) but not on two fixing points for 40 Kg. Spread the load with a bevelled batten ('french cleat') or find...
"the OP said the wall was hollow concrete blocks - not thermals." Fair enough - hollow block fixings are also on the page I linked to... ;)
Plasplugs Thermal Block Fixings work very well. HTH, Pete
"same as above but only set 80mm into the wall" Yep, fair point; I was assuming the chimney was blocked-off - for floating shelves I always...
Assuming it's a solid wall, then 16 or 20mm threaded rod set 200mm into the wall with resin at regular intervals should secure it. Build a jig...
I've got one - it's an OK stapler (no better than 'OK' though...) but a poor pin gun, and like Big All says, not for exterior work at all. The...
Yep, depth stop on mine has a tendency to fill up with sawdust over time; clean out the recess and you should be OK. You can also get a buildup of...
The new door closers have to be about an hour apiece unless they're like-for-like replacements, checking the remaining ten has to be another hour...
I use 18mm MDF for this all the time (fitted one today actually) but Ex-KF is right, an 18mm shelf on a span of that size will sag. I'd either...
Well, if we want to be picky, it's "Capital"... Back to the original question; there's about 34,900 - apparently
"www.catsthatlooklikehitler.com" Brilliant! Or there's always Google... ;)
Separate names with a comma.