Maybe the burner needs checked and adjusted, but I suspect varying flow rates, have you tried a weir cup to get an accurate measurement of flows.
H Do you have the "C" set for instant hot water? If so the initial stored water will be at the set temperature, 1 liter or so, when that has...
Hi, wondering is anyone has a faulty Vaillant Vsmart thermostat, which they want to dispose of/ sell? The clear casing of mine has been damaged...
Hi, wondering is anyone has a faulty Vaillant Vsmart thermostat, which they want to dispose of/sell? The clear casing of mine has been damaged...
Hi, can anyone enlighten me on the part number for a V Smart stat for a combi, I have come across part number 0020223158 which appears to be for a...
Going by the normally used colours of an old 3c/e cable. Red to 4, with a short link wire 4 to 1. Blue to 3. Yellow to 2.( Red and yellow cores...
You might find that PVC sheathed flex is too stiff for your pulley, look for silicon sheathed, its much more flexible, I got a length from Bangood...
The macerator would be ok for that length if you choose the correct model, but it seems that your discharge pipe will be in the garage and then...
The cables won't be side by side, so if pulled in without crossing over should be 16 x16mm!
A friend has a Vaillant EcoPlus 824. With the DHW set at 50C and 'C' set on, it sits at 50, but when a hot tap is opened it creeps up to around...
Hi all, just replaced a seized diverter cartridge in a pals 2y old Ecotec plus 831 R2 combi, that's all ok now, however his wife mentioned that...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
