No. There's a small hex shaped bit just under the head. But the threads go upto the hex bit.
How would I build a return into what I've already got there?
I will give that a go. Thanks for all your help
Just put up a couple of photos of the posts. The joists are 4 x 2. would it also be worth putting another section of timber on the inside of the...
[IMG]
Will they be strong enough to prevent any movement of the post? Someone suggested using a PU resin adhesive. Might just use both to be on the safe...
Here are the photos of the posts. So anymore help will be appreciated. Thanks.
There is no movement of the joist. That's secure, it's around where the fixings of the bolts are and obviously that is causing the whole post to...
Thanks for the reply. I will try and get a picture up later to show you. I have already taken a notch out of the post and the shoulder is sitting...
I'm fitting some newel posts along with spindles and handrail around my decking. I am installing the posts on the outside of the deck. I have used...
I'm fitting some newel posts along with handrail and spindles around my deck. I have fitted the posts on the outside of the deck. I have used...
Separate names with a comma.