Back the plasterboard with your chipboard and then you have a good background for fixing.
Have two belfast sinks fitted with laminate worktop and they are fine, edging strips do bend and with care can be sealed, mines been in 8 years...
Or I could just let in flicker.!
Low wattage economy lamp, could it be residual power activating the ballast? [on a two way switch if that's important]
Against a wall? just cut close and infill with decorators caulk.As long as you are within 5-6mm of wal should look fine.One way to scribe...
Hardly worth the effort as leaves fall and are blown both sides of gates.
Do you have stat valves, are the valves open, if they have partially seized the heat only drifts in from one end and so the bottom stays cooler...
I'm not usually one for posting warnings about potential scams but I had a close miss today. I walked into B&Q at lunchtime and some old guy...
I would tear down the chipboard and replace with aqua panel or ply.
Before using you should check 'O' ring is in position or it can move especially if the copper is not offered up directly in line, a little...
Who would admit that?
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop
