As said Drayton TR4.
Newcastle played well but were lucky,another mistake by Fabianski and Arsenal hit the bar twice. Cmon you Gunners:D
Be interesting when Wales play England with Bales,Bellamy,& Ramsey back in the Welsh team.
Try Poly-pipe they have a universal pipe connector which can be cut to fit.
Aussie,2 50mm holes in parallel on crown of pipe will be ok but i suggest reducing the gap to 20mm,this will give you spare upstand which can be...
He should never have played last night my opinion,can"t have much feeling for Coleen & his young lad.:(
Very unusual for the Megaflo to leak on the cylinder body,could be a slight weep on the immersion heater.Best to call in a pro plumber to check it...
Normal requirement is 300mm depending what cylinder you are installing & position of the thermal & pressure valve,if you have the height make it...
As said always hated installing 3 tap hole mixer taps,beware you don"t disturb the microbore link pipes under the basin.
Yes there will be no problem to solvent weld.
Usr 2 90 x 110mm solvent bends then one horse clip screwed to the soffet much neater than 45% offset bends.
More than likely tiny ball of solder.:D:D
You can get 1/2" flexi hose with isolation valve attached.
Tom,don"t think he wants 110mm soil fittings the one he shows is 1/2" dia.
SPG,can you take photograph & let us look at the flue,also is the boiler floor standing with balanced flue.
Separate names with a comma.