Recent content by Switcher

I've seen none.!

Good point Dik. Last time I was in Glasga though it was full of animals. The drunken and disorderly type. LOL

What about having a bank of lever valves all nicely labelled fitted to a manifold beside the front door. Next to the coat hanger say for easy access. Arrive home in the evening and just open the necessary valve or close as the case may be. Seemples.

Of course there's many other ways of controlling a system Can you point out something viable?

I have Danfoss ones fitted and never had any problems. What do you propose? Heat the entire house and cylinder with no MV's? Pumps? Warm Air? Nah, MV's are fine. You just been fitting cheap carp Dik.

Oh by the way; plant is always leased not bought??!! If you say so Dik. ;)

Get a load of this Dik me ole son......... * As the CEO of our construction division I have recommended the purchase of this superb piece of plant to the MD. Of course it's only out on our site at the moment on hire. I been driving it all week as part of my plant managing duties. Thirty...

Is there a way to overcome this Nope!

It's probably sludged up with gunk and scale. These things sludge up for a past time. Soloution = Rip it out and fit an unvented cylinder.

To help - during the Summer when the CH was off - I did not notice any problems and we seemed to get piping hot water consistently! There's your problem! CH has priority flow. Either Re-wire or Re-pipe to give HW priority!

Used to do some work in coldrooms at -20c. (Stayed clear of the -40c blast chillers though as wanted to keep my bits intact) In winter time stepping back out into 0c felt like a sauna.

Labour only need the public servants and the city deadbeats to win the GE and brown will no doubt be waving the biggest carrot at these bunch of parasites.

He does have quite a CV Dik and sounds like another CEO! Just think you worked your * off for years to gain what this intelligent bloke has gained in a few weeks! [Edited by: admin]

Apart from that house is like toast Turn the room stat down and the boiler stat up.

The shower head was directed unto the mixer and the water passed through the space between the facia panel and the valve body and followed the pipe run into the screed and down through the bison slab and down through the light fitting. Whan I was at his gaffe noticed the pressure down on the...