Tip for cutting plugs without a drill stand, Use the plug cutter to drill right through a bit of 12mm ply about 3" wide by 6" long, place the...
WTF is a parm sander? If you mean a palm sander or 1/4 sheet orbital sander I've been using a makita for the past 6 or 7 years it just won't...
Only takes two min's to find lots online here's one site selling them http://tinyurl.com/266w8g
When ever I work abroad, or even if i'm working somewhere where I'm in digs overnight, I always add between 25-50% on to my normal rate. If...
Unless the bow is over an inch in their entire length and the rust has eaten away more that half the thickness of the bar the clamps are fine to use.
look up robbins timber, http://www.robbins.co.uk they are in bristol
for skirts, arcs and dadoe rails 15g is the best, 16g is ok but 18g is a little too light. senco, paslode and bostich guns are the better...
i have several planes and a set of the chisels and they are the dogs doo-dahs, no new stanley or record will even come close to the out of the box...
I've fitted folding sliding doors if thats what you mean. As long as the opening is plumb and square it's a reletively easy fit.
I have 2 12v drills and the impact and for the money you can't get better. Panasonic manufacture their own batteries so they can cherry pick...
the nearest festool stockest in Blackpool is Top Gun http://www.topgun.co.uk/ they're shop is out by the airport, Trident business park
just got a PLS2 from ebay, what a brilliant bit of kit get one you wont be dissapointed
for 6mm ply a narrow crown stapler gives the best hold, a brad nailer doesnt shoot nails with a large enough head for a good grip
No I won't. Now F* OFF. ROFLMAO [Edited by: admin5] [Edited by: admin]
look here http://www.screwfix.com/talk/thread.jspa?threadID=45874&tstart=45
Separate names with a comma.