Hi, has anyone had experience of the Axminster router (approx £90.00) Ideally I would go for a Festool or a Trend T9, but funds are somewhat constrained at the moment (not true!, always constrained) The primary use would be in my Trend CRT table and I therefore look for something that a; Can be locked on, and b; The height adjuster can be operated in the inverse position, and of course, we all know that position's everything. <u>My maximum budget is £150</u> Cheers
Do a search on here. This has been covered quite a bit recently. If I remember correctly there is the PowerPro(?) from B&Q at about £100 possibly reduced to £80 otherwise you will have to save up a bit more as the better 1/2" stuff starts around the £160 mark.