Legend Power Flue Gas Fire

Discussion in 'Plumbers' Talk' started by fronnie_5, Jan 4, 2009.

  1. fronnie_5

    fronnie_5 New Member

    Hi all,
    Been called out to a Legend powerflue gas fire , the problem is when you turn the fan on the gas light is intermittent in coming on, ie it will work fine fire stays on for , you turn fire off and fan. Then turn fan back on but no light. might not work for days then will suddenly work.
    It has been serviced and nothing blocking or obscuring anything.
    Any one any ideas.
     
  2. mad.max

    mad.max New Member

    Possible APS, but when it was serviced, were the fan blades cleaned. Sometimes, the fan doesn't move enough air if dirty.
     
  3. fronnie_5

    fronnie_5 New Member

    i serviced it mate, removed all dust, 3 moths and numerous wasps from fan area. Fire fired up straight away, ran for 3 hours . Customer then tried to relight the fire a couple of hours later and could not get gas light to come on. She tried the following day and worked ok ,until it was turned off and then tried to relight later.
     
  4. mad.max

    mad.max New Member

    Ok, I hear what you say. I apologise for going on, but did you actually clean / scrape blades?
     
  5. fronnie_5

    fronnie_5 New Member

    Never scraped em pal, brushed em off with my trusty 1 inch paint brush
     
  6. fronnie_5

    fronnie_5 New Member

    I will recheck them mate, thanks for advice
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice