yes 1mm per day..
what type of screed is it..??
sand/cement up to 75mm thick...if so clean/sweep then prime/tile..
gypsum screed 45mm...
imran mate...look at the heading ere mate!!!
as HOTDOG as said...good to see yer back HD;)..
ok for a tile fixer,. but a diyer...come on...
take it down and replace with one off the following.. hardieboard/aquapanel/marmox boards..they will come in 12.5mm thickness.
cover all joins...
uni bomb...you get back on your medication Leonard. ..
use bal...mapei...weber...a good branded adhesive...
prime all walls with a sbr or...
ahh chris..your going to be hard work mate :^O ;)
ok with the 600x600,lay them on a nice flat surface side by side and you will see them...
dont forget to seal the underside and edges..use a sbr.
think you had better not use pva then..leonard..:^O :^O
seal the tiles and grout..
aquamix/ltp/lithofin..just follow mfr inst.
your walls are skimmed,so your weight per m2 will be 20kg (including addy/grout)..
imo just go with a single part flex(porcabond) from...
enjoy your weekend guys..and dolls...;)
that is a very good year he is holding.. :^O
he is from the westend...with them te...ee..th...:^O
fo o k me ..no name.. ya want to stop posting pics off yourself...you aint got no chance;)
well brush that tooth..an ya might have a shout..:^O
admin..ya takin the..colin nish ere..:^O ;)
hahh hahh it went to 818...:^O :^O
...and not out... :^O :^O
i know .....young uns....electric soup;)..an all that..:^O
am/was bored.. :^O :^O
...and chris see when ya have picked them ....
come back on and we will tell ya how to fix them mate..;)
chris am guessing...your oon your todd??...
cos your other half would already have them picked;)
tiles come in diff size and type mate,at...
its a good site tomplum....and i do luv me smilies..;)
jump over tae the tile forum and say hello...:)
mapei nivoplan or bal quickset render.
skim the whole wall plumb/level,job done..;)
i would want to know why/how they came loose/fallen off,before doing anything?...is it for a customer? what if they fall off later down the line....
Separate names with a comma.