Now, I know this isn't necessarily as simple as it sounds but roughly what is the going rate for a joiner to hang a new front door. It's to...
I've got a problem with a salamander 1.5bar shower pump. It's a replacement as the other one worked perfectly for 18 months then developed a leak...
Anyone got any ideas for a filler I could use behind a log burner. It has multiboard directly behind it, but the plaster board that the multi...
I'm putting some metal rise and fall gutter brackets up since the 2 foot of snow we've just had trashed the plastic ones. The problem is,...
I've got a property with an average hot water cylinder which has just had an additional bathroom and power shower added and now needs more...
I'm not easily impressed but I've just had a company called Granite Fitters do our kitchen worktops and they were absolutely brilliant. No money...
Can anyone please tell me how close to a door or window I can site a flue from a fan assisted boiler? And also (two for the price of one) Is...
Subject says it all really. Can anyone tell me how close to a backdoor I can put a balaned flue outlet? Ta much
I'm looking for 3 pieces of structural glass (about 600mm sq) to put into a floor to let light through to the floor below. Does any kind soul know...
I'm sure there is an easy answer to this and I'm just too thick to get it, but do I actually have to provide a new outlet to a hot water cylinder...
Can anyone tell me which is the best silicon based waterproofer they have used for waterproofing an exterior stone wall. I know this is not the...
I'm putting an isolator switch on a bathroom fan, and was wondering if there were any regulations as to where the switch is located. What I...
Does anyone know where I can get a 110 volt transformer rated at 15 amps? Most of the ones I've seen tend to be 3.3 amps or 5 amps. Ta much
Could anyone tell me if the regulations allow me to connect a shower waste on to a 110mm waste stack with a strap on boss, below where the waste...
Does anyone know if you can get a pull cord 3 gang isolator switch for a bathroom fan, or if not, does the normal type of switch have to be...
I want to put some wall lights in a hall, the configuration being eleven 9 watt in parallel off a single run of 1.5 T&E cable. Can anyone tell me...
Anyone ever found a way of incorporating a heat loss radiator into a solid fuel and oil boiler system that would take care of overheating in the...
Does anyone know if a heat loss radiator on a gravity system would work 6 mtrs from the hot tank. The tank is in a loft space and since I don't...
My problem (at least one of them) is that I have an old Methodist chapel in the Pennines which has a very bad damp problem in the front wall....
Does anyone know what the regulations are with regard to the position of the entry of a water supply into a building. Does it have to be 1 metre...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop