phone local building regs and ask them
i have a trimsaw with the left sided blade and i am right handed and visiblity is better than right hand blade
i have the 18v dewalt and i use it all the time for everything
my drill/driver has been demoted to pilot drill now.
just need trigger control
hi all is anyone wrking on the books for a firm in the yorkshire area?
if so whats the base rate for nvq lv3 apprentice trained joiners
oops missed that spelling, we deffo need a edit button
12 mm boards for fire rating
lthe = then, we need a edit button
i use handyandys meathood to mark with pencil etc them chop the hole as goldenboy suggests lthe line the keep to the hole.
i use 10 screws per leg
top middle bottom then inbetween
using 2 screws at each fixing point
just remember dont put a screw where the...
how goods the batt planer, i could do with one for little jobs save luggun transformer about
the lil 18v will hammer through it i use mine for sheet materials, fire doors, cutting timer eg 4" to 31/2 etc
i had the bosch drill jigsaw...
well i have the dewalt 18v ens with 2.6ah batterys
the trim saw only cuts 43mm i think but for genral day to day use its great, better than...
pva wood glue
water resistance pva
cascamite ( dont know if spelt correct)
wbp (weather boil proof) external use
marine ply, underwater
shutter ply, for roofs floors shuttering etc, it has no good face ideal for...
well i always carry
a few tapes
selection on chisels
selection of screwdrivers
so you dont have to spend time building them up
we have the hilti gun as shown in the link some nice strong black grade cartriges job done in ten mins
they range frm £20+ for a 1000 base unit
you can get hangers that go into the brick,
you could chop pockets out and insert
my preferd meathod is strap hangers to a joist at watever...
does any one use these products that sf sell
i normally get evo-stick grab adhesive
and everbuild silicones, expanding foam ect
do they do...
Separate names with a comma.