I'm hoping this makes sense!! I've just bought a house where all the ceilings are artexed in the sharp pointy style popular in the 60s The...
lol. like it
I realise that this is a difficult question to answer without specifics (I can take piccies if necessary) I have removed a partition wall in my...
Ah well this time I've seen it, and if when I get home and test the latest silicone based install that I did a couple of days ago I still have a...
Yep, it's a combined waste and overflow and a little investigation yesterday lead to the conclusion that it's the bottom part (around the hole in...
Thanks for the detailed reply, I'll give that a try in a few minutes when I get home. Yes I did mean a sink, no pop up waste involved thankfully
Running out of ideas here, so need to pick the collective brain of the forum. I've recently installed a new ceramic sink, mated with a new...
From a punters point of view it's great. A few weeks ago I needed my bathroom plastered at short notice, couldn't find a plasterer who would...
I don't believe it, I looked everywhere for something like this. Ended up having to give up yesterday and make it as neat as possible by hand -...
I had exactly the same issue, decided to remove all the old plasterboard from the affected area (it had been dot and dabbed when the house was...
Also if you flush the toilet after isolating the water supply to the cistern, most of the water will go. When I did mine last week, I flushed...
Just done exactly this, used an outer frame of 4x2 with a 4x2 brace across the middle. Topped the frame construction off with a piece of 18mm...
This was the reason for me posting the question, I couldn't see how the maths could possibly work at that figure. I actually got (and accepted)...
Hi Forum. I realise that it's difficult to quote a price for a job without seeing it, but I'd really appreciate a ballpark figure. One of the...
What a crazy situation, you (and everyone else) can't find a plumber, yet new people who are desperate to get into the industry can't find a...
Thanks for the help all, have read the boiler manual, found the flow and return valves, shut them off, shut all the rad TRV's apart from the rad...
The system's already pressurised to 1 bar, how do i go about increasing the pressure? Also, where would I find the isolation valves for the...
I need to drain my heating system down in order to remove and replace the bathroom radiator. I've got a length of hose to attach to the lowest...
Thanks for the reply, the PVA thing was from the handyman site, and yes, I'm having the boards skimmed, as only part will be tiled.
Unfortunately I already had the shower tray, so I've built a frame to the needed height and topped it off with 18mm thick MDF which I can cut a...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop