Just goes to show you should leave it to the experts.
I have been following this post with interest. No matter what qualified COMPETENT installers seem to point out regarding the law you still seem...
It is illegal for you to install it yourself, even if you don't touch the gas side of the installation. It is still classed as a gas fitting...
My money is on Realplumber being the real plumber. I wonder if the other guy will still be in the running come April 2005. Move with the times...
As long as you keep the clearances specified in the cooker installation instructions you'll be ok. It's usually 5-10mm.
Any copper pipe passing through a wall should be sleeved. For an outside tap you also need to fit a double check valve in order to prevent...
I recommend the Telegan Tempest 50 or the Kane & May KM 900. Both expensive but very reliable. Must get them calibrated annually though.
I totally agree. Boilers and other gas related fittings should not be available to anyone without the production of a valid Corgi ID card....
Personally I would refuse to connect pipework that had been installed by a diy enthusiast. There's a bit mor to it than just running a bit of...
I would suggest that you replace the faulty PRV first. If it's letting by then it's the most probable cause for the pressure loss. Also check the...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop