> is it a light grey? Yes. I'd say light to mid-grey in colour. > Any marks or writing on the surface? No, plain pipe, one solid layer of the...
I have a repair to make on some grey 15mm plastic pipe. I don't know exactly what type the pipe is, but a 15mm brass compression fitting was...
What thickness concrete / block will a 9" angle grinder with diamond blade cut ? I have a little 4.5" angle grinder which only cuts to approx...
Thanks Mr no-name. Great links. Will check out further this evening that I really do need a new programmer.
Need to replace a Siebe Climate Controls LP522 electronic progammer - what models should I consider that will fit on existing wall plate? System...
picture would help ;) Quite agree. But I'm in now thanks to the help from unphased. Things are easy - when you know how. Switch was "Made in...
Got an outdoor weatherproof light switch which I need to get inside. Two tone grey plastic surface box and face plate, no manufacturers marking on...
Update: Investigated the state of the roof ( & walls) at the weekend. The roof is in a much worse state than I'd thought, and the walls are also...
I thought that's what SDS + roto-stop where invented for.
Thanks for that suggestion Nigel. That product would appear to be recommended more for roof repairs, rather covering the whole roof as I intend....
Following on from earlier posts in April about the walls, I have now decided to give this old cabin a new lease of life. First job is to repair...
size to say 10mm........ I need 6mm and 8mm bolts to get through the holes in the hinges. 10mm bolts would be too thick. I suppose I could...
Use flat/spade bits Great. I can see a 6.5 mm bit, and I suppose the 10mm one would do for my 8mm bolts. But it doesn't say how long the bits...
Need to drill 6 mm and 8 mm holes through timber up to 150 mm thick, (for coach bolts). Can't seem to find anything from our hosts here that will...
There are lots of ****** in the armour of the coating. Hence my initial thoughts it wasn't worth doing anything with. IF (big if) I decide it's...
What's the best way to repair the external walls of this portable building? The plywood walls are coated with what looks like a cement type...
Had a new gas meter fitted today, by SGN Metering. Got left a card advising that: "It appears that the gas installation pipework fitted at your...
"Evostick contact adhesive" Thanks. Sounds better than a Pritt stick ;)
I need to re-glue to rubber door seal on my car back onto the (metal!) door. What's the best glue to use for this job ? Need glue to cover a strip...
Thanks for the advice. Sadolin Superdec looks good, but very pricey. Cost a few hundred quid to paint all round!!I would defo use it on new wood,...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop