I don't know yet re. oil/water...paint has been delivered to site by others., I won't find out till tomorrow. I shall follow your advice re...
Not exactly speaking...social housing maintenance contract. It has a standard to meet of course, but not the same standard as Mr &Mrs Client.
Greetings! I have a full redec to start., walls, ceiling & white gloss to timber. My question is re. undercoating prior to gloss paint. Is it...
That's reassuring to read! Hopefully when I get the new taps fitted and wang some water thro them it'll right itself. Many thanks!
Thanks for the reply. Am baffled as to how swapping two pillar taps for two iso's has changed anything. Will check the pressure and do a reset...
Evening all. So.. combi as per title. Turned combi off. Turned water off. Ripped out extg kitchen, put iso's on hot & cold tails. Hot water...
Them's 'em... Many thanks!
Hello., Can anyone tell me where I can buy on-line the Freud replaceable/disposable router blades. They are 50x9x1.5mm with the bevelled edge. I...
Hello., Can anyone tell me where I can buy on-line the Freud replaceable/disposable router blades. They are 50x9x1.5mm with the bevelled edge....
Derby.
I think I'm going to have to bite the bullet and wash it down with vinegar soap, then solution. Cheapest I can source locally for stabilising sol....
Many thanks KIAB., The ceiling is good with no holes/cracks. It's the chalk dust that's concerning me. I don't relish washing the whole ceiling...
Hello. I decided to paint a bedroom ceiling; Half way through, the original paint began peeling off onto my roller. Suffice to say the lot came...
Maybe a brown sharpy?... I haven’t opened them yet,, it may be that the paper backing isn’t a million miles away from the colour of the w/top. A...
Well ya live n learn. Thanks for the reply MK. I suppose I’d better keep the customer happy then…
Well… I just had a customer insist I clad the open ends of two runs of base units with worktop instead of using clad- on décor panels. The worktop...
Good point Big All. I haven’t used the saw yet but it had occurred to me that I need to check the length req’d front & rear for the saw to seat...
Thanks for the replies guys. I shall cut in confidence. I take the point about b/bars but I have two guide rails so I figure to use the 1.4m lg...
Hello all. Having just acquired a Makita plunge saw with guide rails etc. it strikes me that 1.4m guide rail is a little cumbersome, especially...
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop