Hi, my build is completing and we want to use Nest for controls of the boiler, hot water and 4 UFH zons (in addition to the traditional rads). I...
Just finishing my house build and we have a very wide front entrance. the total frontage is 15M and is on a slope so I was thinking of a...
So, I am fitting a 1.1m long peninsular in my kitchen but I have underfloor wet heating so can't screw into the floor. What is the easiest and...
So, I have planning and building regs approval on my build. Almost appointed a builder and we have already agreed that the window supplier should...
So, I have planning and building regs approval for my extension and garage and currently getting quotes from builders but I have a couple of...
So, we have planning and building regs approval for a 36 SqM single storey extension plus separate 56 SqM garage but have been trying to find a...
Just starting an extensive extension and new garage. I know I need smoke and heat detectors but I can't find any that are recessed so are not so...
So, we have a split level home on a slope that is about to go for building regs approval and out to builders for quotes for a 119sqM extension...
I am building a garden room and wanted to use 7.5mm concrete screws to hold it to the concrete base but I have tried 3 6mm masonry drill bits and...
So, I am building a cupboard under my stairs which has restricted head height so need a door 1700mm x 820mm. Looked at most of the providers but...
So, I am building out my coffee shop and it only has cold water supply and no gas. The current mini kitchen has a water heater under the sink and...
So, I am fitting out a coffee shop which was built in the 50's and when wallpaper was stripped it pulled off most of some kind of black ruberised...
I need some 2 x 2 curved timber (about 1 meter radius) to make a café booth for our new coffee shop. I know you can build yourself with ash...
So we are fitting out our coffee shop and it has no heating (previously a small car showroom). It is 10m x 10m and we do not have a gas supply....
Lately, my heating has come on at the weirdest times, even when turned off at the timer4. I thought it was the thermostat so I had a Nest fitted...
So a few years ago I did my lounge in 18mm solid oak boards ( random lengths). I over bought so had a bunch left. In the lounge I usedself...
So we have a large cold water tank in our loft fed by the mains via a 15mm pipe and 1/2 connection. It is really noisy and corroded so I want to...
So I looked up the regulations for notching and drilling joists and it says you can drill up to .25 diameter holes. I have 9" Joists so I should...
So I am renovating a bedroom and found a socket that was in a removable panel that was joined to the twin and earth by a chocolate block. The...
So I am redoing my main bathroom and we are using a standalone bath and floor mounted tap. The tap needs 2 BAR and I have a gravity fed system....
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop