Yes Sheds , recommended , either method. Cheers !
Hi Count Handy andy has got it right . If your on a pair of hinges draw the screws from the bottom hinge putting the bradawl in to one of the...
Yeah yeah!but it has to be fitted first. The old penny all round,clearance to suit on bottom. Leading edge both stiles. A tip to the diy ers ,...
Can anyone tell me does this Gorilla glue come anywhere near to what the Ad's say it does? I'm not to aquaint with most of the modern stuff but...
Indoobitibly!!! Cheers !
Door Lifter ! whatever next , must be for shirtlifters. A wedge and bolster, never failed yet Cheers !
Just to add to the CCTV thing . A while back my car suffered quite a severe dent in a Tesco car park . Got a quote of 370 quid to repair . Phoned...
Hi Henno Doors on stairs are a definite no no, as are doors opening out on to half or quarter landings as you seem to be describing. Winders...
With door fully open rub ball of hinge with candle and the same with door closed. No mess , no stained timber , no prob. Try it. Cheers!
What is it with this Aqualoc is it an old lot as I thought the contortionist stuff went out with the origiinal laminate glueing pattern years ago....
Aw! come on now Audi, don't be that way your input here is highly regarded and even old dogs like new tricks so lets have it. Cheers !
Think I've asked before on here but am still on the lookout for a 7.2 V battery for my Makita drill. It's old and I have tried a few sites but no...
Thought for a minute you were on about a gyneacologist at that rate !
About a couple of months ago my first posting on here was to seek advice on chasing up non payment for a finishings job . The deal was on a verbal...
Hardwood ! No ?
Hi Tim No offence taken and certainly none meant. You did have us wondering about the ply thickness which I as a non modelling hand know nowt of...
That's a question more for a plumber but you probably wont be offered a choice as most stores only stock sheet lead in rolls from 150 mm upwards....
L O W For the brickwork . Check the opening for parallel , Plumb and Level. Never assume the brickie has left it so. In any event allow clearance...
Hey good for you Tim. That says it all and you do know the gen for modelling . Now we know where your handle comes from you being in to choppers....
Separate names with a comma.
Forums
Facebook
Twitter
You Tube
Instagram
Shop