...There is also Titman and Wealden
All Wealden here, never have had a problem. :)
Got very few Trend router cutters, most of mine are Whiteside,Wealden & a few from Rutlands.
...might find a suitable bit, but 1/4" it's usually around 50mm.
Wealden might do something, got T8056B-8,it's 8mm, has a 75mm shaft, with a...
I just had a quick look,it says the angle of A is 14.9mm where as the trend cutter was 12.7mm which is 1/2".
...angle pitch of the dovetail your changing.
Right, just looked on Wealden, they list their T1020B as suitable for most cam lock dovetail jigs,...
...a lot to be desired, & Erbauer wouldn't touch them,got a few Freud,Wealden,Titman,Rutlands, & Jesada cutters (sadly no longer available here)....
its a good set for starters and also not pricey.
So fits the budget of OP £20-£30
Ps I also use Titman and Wealden.
I tend to use a mix of Titman and Wealden bits.
Never brought a set, just buy a few and then buy more as you need the profiles.
...excellent. They have a very good cut quality for the price too.:)
Freud router blades are also good quality, although not Titman or Wealden...
But expect to pay around £40, not the £7 cheap specials that reddiseals were knocking out.
I've got one on back order with...
...100mm and come in at a couple of hundred quid for the largest
Wealden tool go upto 90mm at a more modest £28
Any buiger than that I would...
Wealden do ones that will go to 28mm with the use of a 6mm groover.But there is not much choice in profile. Or their ovolo one goes to 25mm
Wealden |Tools do a 12.7 x 120mm for £14.40 inc VAt & Postage, good cutters and excellent service.
I use replacable tip cutters, The KWO Vari-tip from Wealden Tools works well.
I got this from Wealden....
Re: replaceable tip cutters, I prefer Versofix from Wealden Tools.
Good quality, cheaper & excellent service / turnaround time from Wealden :...
Wealden Tools do a bearing guided ones that are a lot easier to use than a straight bit and router fence.
...but if it has to be 3mm then Wealden do one that cuts to 11mm here:-
...them tight to get into the slot. I get the Tanseli ones from Wealden Tools. The Lamello Fibro biscuits are also supposed to keep their shape...
Separate names with a comma.