Can one use gas bottles on a normal mains gas cooker, or do you need some kind of adaptor. Is there any other modification required ?
i live in a victorian terraced house. In the loft i have just noticed that the lower part of one of the rafters that run along the wall at the...
hello does anyone happe to know if you can fit a honeywell synchron motor into a acl drayton 679 3 port valve ? i.e. are s. motors universal?
thanks tph1. sounds like my problem. i'll give it a go.
Thks but its not the look of crumbling bricks that particularly bother me, but I think it is causing moisture to penetrate the wall. Do you think...
On the exterior wall of my victorian terrace house, a few bricks are starting to crumble. I think this is causing some bubbling plaster on the...
I don't have a multimeter,and wouldn't know where to start with one. The pump does run, and the 3-way valve lever moves from mid position to hot...
Hello, my potterton boiler fires up for hotwater but doesn't fire up for heating. I believe i have a Y-plan system. I have checked the room stat...
Thanks sinewave and spyder. i think i'll try changing the s/motor and then failing that get in a sparkie. Thks for all your help.
Thanks v much for your advice. If I disconnect the power to the valve, and then try turning the system on, should i then be able to identify if it...
RCD.
Sorry to bring up a previous post, but I haven't been able to get this sorted yet. My system keeps tripping also when i try and put on the CH from...
Its not a wind-up, I really am that clueless. Do you think I need an electrican or a heating engineer for this ? thanks.
It's the main power switch for the whole house which trips.
JP, I have taken the plastic cover off and nothing looks at all wet or damaged, and the cb looks to be undamaged. It is definately a RCB tripping.
i have tried isolating everything and still come up with no conclusions as the damn rcd seems to trip out randomly now. Somethimes when it trips,...
thks but i'm not sure i want to change the breaker type as the whole system has been working fine for many years before this problem occur.
its Y plan. How do i check it? It flicks over from w-m-h properly and the wiring inside looks ok.
I have the following problem. When the hw system is switched on (either manually or at programmed times), the mcb trips. However if switched on...
Separate names with a comma.