Hi, Please give a clue as to what this is for. I am certainly very intrigued. Thanks....
Just to answer the question as to why I was asking: I have been looking at a property which has an oldish WB heatslave 15/19 combi located in a...
Hi, Can I ask if anyone has any comment on wall hung Oil boilers? Familiar enough with the floor standing units from the usual suspects. But...
Hi, Back on to the MOMO specifically the 2 port. Just had a look at the spec listing on their website. The 2 port valve + actuator shows...
Hi, Got the small roller on the pole - didnt see/know the screw was interchangeable with the bit that rams in the end of the roller. Still...
Hi, using a pole for a roller (12") for high ceilings / stair wells (no stair fitted) can i ask how do you get into the corners of walls /...
Thanks – obviously thought as much. Incidentally when checking insulation the likes of Kingspan only offer that it does not offer any...
Hello Can I ask what people prefer or consider best to go from copper to speedfit a) Copper into a speedfit coupling then into speedfit...
HI & Thanks for that Umm - aside from the colour is there any way of checking if its a copper olive or brass. Would they be sold identifying...
Hello, Can someone clarify something on the JG speedfit stem elbows. The stem has a slight step on the stem, the narrower section is a loose...
Hi, Can anyone help with a rough boulder wall – inside, which is a feature and its adjacent to another inside wall (as it is within an...
Hi, You are right about the centre. Taking the other end it want to pull tight against itself , but coming from the centre it seems to want to...
Thanks, Kink was not on a bend (have formers) it was whilst threading through stud work from upper to lower levels. I think i should have totally...
Hi, um erh as a bit of a copper fan on my first go at using JG Speedfit I (we) have kinked a couple of 15mm pipes (yes i'm a numpty) - a hot and...
Hello, For a bathroom that is to be tiled to the ceiling which of these would you choose. Green moisture resistant plasterboard or Normal...
Robster, The reason was that originally i did not want any down lights as there were to be no cuts into ceilings etc and light / switch /...
Hi, Aurora look ok. And thanks the £20 i'd seen were with a CFL. Also within s/f there are the halolite at 8ish quid and then again for the CFL...
Hi Sorry forgot to mention I want to stick with 240v so i'm not really looking for any 12v systems. just found a reference to "aurora" on...
Hi, Can someone recommend or suggest on down lights These need to be adjustable and parts B/C/E compliant. They also need to be 7w CFL. I...
Thanks I'd had a look at JG before and perhaps been too quick to dissmiss due to plastic and overly swayed by the shiny ones. I'm thinking very...
Separate names with a comma.