Best wishes to you too Ms Ratcliff. One thing I do know having spent most of my life running a successful company is when to walk away from...
Yeap,what I said 2 days ago ....
So you liked the look of the boiler!!!! Most people stick them in a cupboard, shut the door and forget them, looks are the least important point....
Ummmmm, which is what I said 2 days ago!
Or the pump has been incorrectly wired to a permanent live. The pump overrun on Glowworms is on a timer which can be adjusted. Perhaps been set...
Usually there is a collar to fit over the splines (or cross) which goes between the tap and bath. Guess you've not got these....... Why buy...
It looks like some sort of sludge / filter on your central heating. Could be a water softener perhaps. Depends where it is leaking from, but...
Oh, and should have mentioned - need to check that all the wiring connectors are plugged in properly and wiring continuity (no broken wires or...
Expect you've done it by now, but yes, where you've arrowed will be fine.
Don't do a lot with Worcesters, however, Fd is the appliance fault, 231 I've no idea to be honest. Fd normally means you've got to clear the fault...
Concealed would be best as the brass shower bodies are normally quite large and unsightly and best hidden away. Decent quality ones will come...
Drain down the storage in the attic before you go for it - less head, less pressure coming at you. Top advice from teabreak, make sure the...
Its a combi. They go through a series of checks thinking about life when the CH comes on before firing up, 60 secs is a bit long though unless you...
Not quite the case - the better quality electric showers are also thermostatic. See item 24529 from our hosts for example. So without googling...
If only Vaillant made drill/drivers as well.....;)
Well its not likely to be an expansion problem then. Once the hot has reached temperature the 'expansion' noise would stop and the cold is not...
Good advice from Kiab. Sounds like the gas pressures and gas rate are all ok with the current set up, but you'll regret keeping that old...
I'm not so sure it is pipe expansion (maybe wrong). The OP said when hot and cold taps operated......... By all means do all the things others...
He posted a link to the pic.... Correct, lower LH end into the rad valve. Suggest you put some jet blue or similar onto them when you assemble...
Without actually seeing it - but probably, yes. GSR - Gas Safe Registered bod
Separate names with a comma.