the virtuex morticer is the same as the portacable and is on offer at rutlands...
well i Used it on the front of a house for mock tudor beams over a year ago and it hasnt shrunk or expanded at al and stilll looks ace. The...
i would use accoya as it has a service life of 50yrs minimum
The ts55 does tend to struggle a bit in hardwood doors etc. Even more so with the wrong blade. The ts75 manages alot better but still stalls if...
dunno what BS they are but i fit alot of assa fire escape locks on schools
depends on the situation. If the house is lived in and you have to go outside for every cut etc then yeah £4 per m is probly right as you are...
just have some jointed up. Block tops would look horrible in my opinion
contact warrington fire and they should be able to tell you what you need
repairs would be tricky to retain the 30min and should only done by someone trained to do so, I would replace
dowel will show end grain
fitchett and wollacots?? in nottingham??
why not another dmt? they do a 8" x 2 5/8
drill a hole in the under side to access the end of the threaded rod and put a nut on the end and tighten
same as above but only set 80mm into the wall as the brick is only 100mm so going 200mm will go right into the chimney/flue liner
depends on the size of the windows really as upto a certain size can be done with 1 man were as the bigger window take 2 people. Also depends on...
iron on is fine. to glue put pva on both suface and let it dry then iron on. i would only glue paper backed
yeah will cut it fine with a bi metal blade
fein multimaster to finish the cuts off or a good sharp chisel
depends if you want lost head nails...
That link has mmade my day, will be using that in future.
Separate names with a comma.