Correct UP, as you say the load is only on when the tap is turned on. I just like to discourage people from adding large loads to ring circuit's,...
Dedicated circuit, 16amp breaker with 20amp dp switch before the heater, just like an immersion heater.
You don't really need anything at all, rcd protection is necessary though.
Are you sure you can't work out another way i789? you'll loose the will to live if you try to deal with suppliers!
http://www.tlc-direct.co.uk/Technical/DataSheets/MK/WiringDiagrams.pdf --------------------- Have a look here.
I'd do it for a distance up to about 10m, more than that i'd think again.
far, far, more demanding.... --------------- Just different Larnacaman, not necessarily more demanding for someone who's doing it all the...
JP, just think about simple things like cable runs for example, you know, how to get a bit of 6mm t/e from the consumer unit to the kitchen for...
Well said Fireball, there are a lot of commercial/industrial prima donna sparks out there that think domestic work is beneath them, until things...
Yes that's the plan JP.
as im part of a niceic approved company ------------- I think it's a company requirement then, nothing to do with niceic i'd say.
No need for capping, just chase & plaster in. Having said that, if I was running the cable on the surface for someone else to plaster then I would...
It would be difficult to put it anywhere else JP, the meter box is in the outside wall of the lounge so a switch-fuse wouldn't look very nice in...
I reckon it must be a nice warm draught Lucia with 900 watts of light/heat to get past!
I doubt whether a meter chappy would even know what it was these days JP, let alone have the right or inclination to tell you to remove it!
Firehoods would block the draught or you could make-up some 10 inch square plasterboard boxes to fit over them, (assuming you can get into the...
I suppose EDF wouldn't like it if I put my switch-fuse in their box would they?
You shouldn't be connecting SWA direct to henlies anyway. ---------------------- I wouldn't have done that anyway sine I would have put the SWA...
Thanks for the quick reply both, I realise now it was a dumb question but thought as it was SWA maybe not!
Hi all, Just a quick question, 16mm SWA sub main, 25 metres long Henley'd off from meter tails, does it need a switch-fuse at the supply end? i'm...
Separate names with a comma.