You could always hire the router and jig from HSS. I did this for my first worktop and it worked a treat. Plenty of "how to's" on the web, trend...
Cheers lads, soldering on was spot on, lifted the manhole cover and it was full of the nasty stuff. Gave it a good rodding and whoosh! All...
Ta so far. Not syphonic No blue blocks or rim hung cleaners used. Clear from pan to bend to vertical soil pipe.
Recently my toilet seems to be draining slower than it used to. The initial flush seems ok, then the last say inch of water takes about 5 seconds...
Cosworth They (D&M) have to replace it by law under the sale of goods act (not fit for purpose). Don't let them fob you off with a "return to...
as above. You will most likely have 2 immersion heaters in your hot water cylinder, 1 for overnight cheap rate (the lower one) and one for...
Some advice please. My boiler (a recent Worcester Bosch system boiler) is more or less next to the hot water cylinder (about 3 feet of pipe)....
To calculate the angle of the roof (using a calculator!): 1) Measure the width of the roof (at the gable, say at gutter height) and divide by...
I clamp one piece of 8x4 on top of the other and use that as a guide.
oliver. What about if turning on other taps causes water hammer. The vibration could cause the spout to release its held water? To the...
What about a bench morticer
You probably got the lead caught!
What you need to do is this: Piece A needs to overhang the top step with a 45 on the end Piece A+1 needs to go vertically up the top riser...
there is a bigggg difference in temperatures from the flow and return to the condensate. So the last metre of the return pipe is hotter than...
My mother in law has just had a new cylinder fitted to her AGA, the hot water is now very hot! Previously the unlagged cylinder heated the...
Thanks for all the replies, I'm doing the job next weekend, i'll come back and let you know how I get on.
I've just done this with half of my york stone roof. Boy was that hard work! The biggest weighed over 10 stone. I used aluminium pegs (the...
Thanks Charley. I've already bought the replacement gutters (ex stock from Arnold Laver at Bradford), I'll prep them, then pull down the old...
No they are not lead lined, they are just tanalised.
I am about to replace my wooden gutters, how do you join the gutters to the plastic downpipe? Do you just drill a large hole in the gutter and...
Separate names with a comma.