Thanks everyone, looks like I'll hire a stihl cut off saw, just seen a youTube video of it in action, looks a real beast - it will make short work...
I have about 30 450 x 450 slabs that will need cutting down in size to fit around walls etc on my new patio. The problem I will have is the...
Hi I am constructing some plywood shuttering ready to pour a concrete slab and would like to buy some release compound/oil so that the formwork...
Last year I painted my 2m square bathroom ceiling. The ceiling was skimmed the year before so had plenty of time to dry out. I painted the bare...
I Have tried a small brush but I could not easily paint behind the spindles. I already have a radiator roller - it is just the diameter of the...
I need to paint a wall behind some staircase spindles that are very close to the wall (approx 2 cm). I cannot use a brush as the stair spindles...
Spot on mikeyrf900, fitted a new reduced pressure valve and modified filling loop assy - problem sorted. Many Thanks
I refitted a radiator after carrying out some work on the wall behind. After opening both of the Rad valves the pressure dropped down to 0.4 bar...
I need to remove a radator to carry out some repairs to the wall behind, removing and refitting the radator and using the built in filling loop to...
I have again spoken to the dealer who is fitting the Quickstep floor, apparently Quickstep say that unless doorbars are fitted their guarantee...
I am having Quickstep Laminate flooring fitted throughout my house (excluding Bathroom) in a couple of months time. Last night a rep of the...
I have an Intermittent fault with a Glowworm 30 CXI that is nearly 5 years old. Sometimes when turning on a hot water tap there will be no hot...
Bosch blade 24387 from Screwfix, not sure if it fits your saw, it's a bayonet fixing. The fixing looks the same, will give it a try. I need...
I have a Black and decker Jigsaw machine and need to do some intricate cutting ,Unfortunately the blades for this machine cut on the upward stroke...
Obviously I can't check - it's Saturday afternoon, if this is the case what is the correct workaround in this instance?
Thanks Big All
I have got to replace some badly damaged floorboards in a house built 20 years ago. I can only find 18mm thick boards in the local builders...
I have to overboard a T&G floor prior to having some Laminate flooring fitted due to the poor condition of the floorboards.I envisage using 9mm...
Thanks to everyone for your advice. Would you use a solvent or water based paint, I have always used solvent based paints but am thinking of...
I can see how satin will probably look better but is satin generally the in thing now and would you paint the other wooden features in the room...
Separate names with a comma.