I have about 30 450 x 450 slabs that will need cutting down in size to fit around walls etc on my new patio. The problem I will have is the...
Hi I am constructing some plywood shuttering ready to pour a concrete slab and would like to buy some release compound/oil so that the formwork...
Last year I painted my 2m square bathroom ceiling. The ceiling was skimmed the year before so had plenty of time to dry out. I painted the bare...
I need to paint a wall behind some staircase spindles that are very close to the wall (approx 2 cm). I cannot use a brush as the stair spindles...
I refitted a radiator after carrying out some work on the wall behind. After opening both of the Rad valves the pressure dropped down to 0.4 bar...
I need to remove a radator to carry out some repairs to the wall behind, removing and refitting the radator and using the built in filling loop to...
I am having Quickstep Laminate flooring fitted throughout my house (excluding Bathroom) in a couple of months time. Last night a rep of the...
I have an Intermittent fault with a Glowworm 30 CXI that is nearly 5 years old. Sometimes when turning on a hot water tap there will be no hot...
I have a Black and decker Jigsaw machine and need to do some intricate cutting ,Unfortunately the blades for this machine cut on the upward stroke...
I have got to replace some badly damaged floorboards in a house built 20 years ago. I can only find 18mm thick boards in the local builders...
I have to overboard a T&G floor prior to having some Laminate flooring fitted due to the poor condition of the floorboards.I envisage using 9mm...
I have just had two new interior doors installed and both of the frames replaced. After priming and undercoating; I intend painting the doors...
I have just had a complete replacement bathroom installed , this included installing a new suite, flattening and skimming the ceiling and complete...
Can anyone identify the make of this TRV? http://homepage.ntlworld.com/grahamw/valve/trv It was fitted by British Gas 4 years ago and has...
I am just about to start repainting various rooms in the house. I originally planned to paint the ceilings white and the walls a light cream....
I have soon have to remove a radiator to paint the wall behind. The radiator has a TRV fitted one end (marked British Gas) but to me it looks like...
Went to look at a house a friend of mine was thinking of buying, could not believe that that the bannister had been removed, just a wall one side....
Anyone used one of these? http://www.selkin.co.uk/site/site/home/home.asp?c=32&t=p&i=125 What type of finish can I expect, is it worth the...
I am in the process of starting to renovate our bathroom, at present there is a three quarter length bath fitted. A pipe duct at the foot of the...
The rubber sealing gasket between the sink and the base of the large monoblock mixer tap on my kitchen sink has perished as the tap securing nut...
Separate names with a comma.