Did exactly the same conversion last year for a neighbor, but building control wouldn't allow battening single skin walls. Had to build a 4x2 stud...
Currently there are no controls on this system. The boiler and pump are both independently 'controlled' by switching on the socket they are...
Hi, as heading says above I'm after a controller for 2 heating zones and gravity hot water. Plenty out there for s type etc fully pumped systems...
I must of been lucky then... Just finished fitting a Wren kitchen that a customer had ordered. It arrived exactly at the time they said, on the...
Save yourself the trouble of cleaning the bitumen off the floor and use elastion or screwfix's own...
Obviously the high humidity is causing the damp problem. It looks like the regular spots are the nails/screws corroding below the Artex. I would...
The ones I referred to earlier that didn't work were the remote ones, don't know if the direct ones are more reliable...
I always thought these were a good idea, until I recently worked on some flats down the road to me. They are only four years old, all fitted with...
Hi there, I may be able to help you out too. Which area of London are you as the SE is quite a big area? I'm working around Walthamstow at the end...
Any of you out there got any unwanted oak flooring from Howdens? I've been fitting this to my house and am just a few bits short of finishing! I...
I use Dow Corning Mirror Adhesive available from our hosts, stock number 95057. The supplier who makes my splasbacks said this was the stuff to...
I used these people a couple of years ago for my van http://www.demarvan.co.uk/ply_liningkits.asp For £115.00 (fitted if you live near them...
Existing supply is steel pipe, put in around 1950's. I'm assuming that I'm going to have to dig under the foundations and into the properties,...
I'm currently working on a pair of semi-detached properties that have a shared water supply. The supply comes into one then tees off into the...
I've used this company a few times, http://www.kitchenrefurbs.co.uk/ You can also get a quote online from their website to get an idea of cost.
Do you have the riving knife fitted? mine started doing the same a few months ago and was entirely down to the blade. If you were using the std 48...
Please use the spell check!.......
What is your stack made of? If it's plastic it will be easier, as you said it's a victorian property it may be cast iron which may be a bit harder!...
Certainly no damp in the kitchen, I checked for that! The worst bowed top is the furthest from any water supply. The worktop by the sink etc...
Have any of you come across this type of worktop bowing? I went to see a job today where their worktops had bowed about 10mm per meter. They...
Separate names with a comma.